Products
PRODUCT LIST
Manufacturers of below products:
LPG Copper Pipe (ARAI Approved)
CNG Steel Pipe (ARAI Approved)
Ventilation Ducting Hose for LPG / CNG Vehicles (ARAI approved)
Rubber Pipe Hoses
Gas Solenied Valve (Zinc & Brass)/Petrol Solenied Valve
Emulator
Air Mixer Assembles
Export Quality Stands
Electronic Change Over Switch & Harness
Sensor (ZW)
Coil for Vapouriser, Solenoid and Multivalve
Auto LPG / CNG Diaphragms for 4W / 3W
Flow controller Body with Single Flow
CNG High Pressure Valve for 3W / 4W & Air Mixer Assembly
Pressure Guage for 3W/4W
Electronic change over switch & Harness for all 3W/Kit
Oil Pump & Oil Tank / 3W
Gas pipe Small / Big for all 3W kit
Importers, Exporters & Suppliers of below products:
Copper Tube
Copper Coil
Copper Rod
Copper Flat
Brass Tube
Pipes & Tubes
Sheets & Plates
Buttweld Fittings
Forged Fittings
Flanges
Fasteners
Copper Rod

Sizes and Shapes
10 mm to 80 mm in round shape
10 mm to 65 mm in square shape
10 mm to 50 mm in hexagon shape
Weight of Copper Rods
Flats, Square, Haxagon Rods
In kilograms per meter (1 meter = 39.37 inches = 3.25 feet)
Round Rods
(0.007021 x A2)
Hex Rods
(0.007741 x A2)
Square Rods
(0.008939 x A2)

 

 
  Specification for Copper Rods
  As Per IS -4171, 1s-288,IS-613 Standards
Material
Description
Specification Copper
%
Composition
Limits
Other
Impurities
Tensile
Strength
kg/mm2
Min.
Physical Properties Fabrication properties Brazing Soldering Hardness
ISS BSS Phosphorous
%
Arsanic
%
Elongation
%
Electrical
Conductivity
Cold Worked Het Framed
Phosphorous
Deoxidized non arsenical Copper
4171 2874 C
106
99.90
Min.
(Including
Silver)
0.15 to .05   0.06 Max.   13 to
27.5
Max.
  Excellent Excellent Good Good  
High Conductivity
Electrolytic Tough
Pitch
613 2874 C
101
99.92
In.
(Including
Silver)
  --- 0.03 Max O 23-24
HB 23-25
HD 25-27
O 40-45
HB 12-18
HD 8-10
99.25%
IACS at
20°C
Excellent Excellent Good Good 45-60 O
70-90 HB
90 Min. HD


Copper Flat

Sizes Sharpness
Width - 20 mm to 150 mm 1. with Sharp Edges
Thickness - 5 mm to 25 mm 2. with Round Edges
  3. with Full Radius
In annealed (o), half hard (HB) and full hard (HD) condition
Weight of Copper Flats/Bus Bars
In kilograms per meter (1 meter = 39.37 inches = 3.25 feet)
Rectangle Flats
0.008939 x A x B

 
  Specification for Copper Flats/Bus Bar
  As Per IS -4171, 1s-288,IS-613 Standards
Material
Description
Specification Copper
%
Composition
Limits
Other
Impurities
Tensile
Strength
kg/mm2
Min.
Physical Properties Fabrication properties Brazing Soldering Hardness
ISS BSS Phosphorous
%
Arsanic
%
Elongation
%
Electrical
Conductivity
Cold Worked Het Framed
Phosphorous
Deoxidized non arsenical Copper
4171 2874 C
106
99.90
Min.
(Including
Silver)
0.15 to .05   0.06 Max.   13 to
27.5
Max.
  Excellent Excellent Good Good  
High Conductivity
Electrolytic Tough
Pitch
613 2874 C
101
99.92
In.
(Including
Silver)
  --- 0.03 Max O 23-24
HB 23-25
HD 25-27
O 40-45
HB 12-18
HD 8-10
99.25%
IACS at
20°C
Excellent Excellent Good Good 45-60 O
70-90 HB
90 Min. HD

 

 
 
 

Site by www.mesotek.com
© Shiv Shakti Impex